Tutorials - 23/24 - The Idea Room

Tutu Tutorial

I have always wanted to buy my girls one of these tutus that can be found in boutiques and craft fairs but have been to cheap to pay the $15+ price tag. Upon inspection I noticed that they were just elastic with strips of tulle tied onto the elastic. I thought…I can do that. So I finally got around to doing it and they are so simple. Really! I spent about $3 on tulle from JoAnn’s (use your 40% off coupon), and used some elastic and flowers left over from previous projects. (I found my little rose bud flowers at Wal-Mart and had used them to make some baby head bands when my baby was a newborn).

I took some elastic (any size will do) and measured it so that it fit nicely around my baby’s tummy. Then I sewed it together with the sewing machine several times so that it would not unravel. (You can also hand stitch it).

Then I took my tulle (originally I used tulle from the bolt to make the smaller tutu which is a bit cheaper than on the spool. I found the spool tulle in the wedding aisle at JoAnn’s, which I will be using for the longer skirt for my older daughter). Anyways, cut your tulle into 6 inch wide strips with the length being double that of how long you want your skirt to fall. So…for the baby I wanted it to be 10 inches long so that it fell a bit below her knees. I cut my tulle into strips that measured 6 x 20 inches. Make sense?

For the baby I ended up using about 2 yards of tulle total cut into strips. You will need more for a bigger skirt. Originally I did not get enough and had to go back for more :(!

Then slip the circle of elastic up onto your thigh and while sitting on the couch with your feet propped drinking your favorite soda, scratch that…I just quit…ice water, tie each strip onto the elastic with a double knot. Your skirt will be more uniform if you make sure that the knots are at the base of your elastic.

Then when your tulle fills the elastic to your liking your done. So simple. But of course I wanted to add a little something extra. I hot glued three rose buds in the center of the tutu!

I am really happy with how it turned out. And you cannot beat the price tag! By the way, I would love to see how your projects turn out if you ever use any of these ideas. So if you want to you can leave me a comment and a link to your pics.

April 17, 2009 · Filed under: Gifts, Kids, Tutorials Tagged with

Make A Crayon Roll

10 Comments

I have seen these adorable Crayon Rolls in several places. But I wanted to make one to fit my daughters longer Crayon Twistables. So I looked at this tutorial and saw how they were made and then came up with this creation. If you want to make yours for crayons, colored pencils, or markers, you will need to make a measurement and adjust your material requirements in height.

You’ll Need:

2 pieces of fabric – 14 x 21 and 8 x 21 (inches)
1 piece of ribbon – about 20 inches long
Matching thread

* I sewed a 1/2 inch seam throughout this entire project

First, cut out your pieces of fabric…
And then fold them in half, lengthwise and iron them flat.

Take the smaller piece of fabric, make a seam right along the fold, close to the edge.

Then open up the larger piece of fabric and lay the smaller one on top, matching the two raw edges of the smaller one with the one raw edge of the bigger piece.

Sew them together along that long (21 inch) edge.

Then fold the other half of the larger piece over the smaller piece that you just attached…… and pin it along the long edge and the 2 sides. (You’ll be folding it temporarily in half right where you previously ironed the fold on the big piece, but the opposite way.) So now you have 4 raw edges pinned all together.

Sew along all 3 sides (not the fold) leaving a gap at the bottom, so that you can turn it right side out.

Trim all corners before you turn it right side out so it will lay flat.

Turn it right side out and iron it. Sew around the entire roll, close to the edge.

Measure the length of the crayon roll and divide it by how many compartments you’ll need. I sewed my crayon compartments so that they were 1 inch apart. Sew each line just until the edge of the top piece.

*If you do not want to see the lines of the sewing to separate the crayons, you may want to sew the lines for them before you sew the back of the roll closed. But I wanted to be a ble to center my lines perfectly and the lines on the back did not bother me.

Lastly, turn the crayon roll over and pin the ribbon to the back. Line it up to be sewn with the seam of the last compartment. Be careful to not sew over your crayon pocket or you will not be able to slide your crayons in!

Stick your crayons in and roll it up.

Now you have a cute and portable crayon roll to slip into your bag or purse to pull out at church, doctors appointments or while your waiting in a restaurant.

By the way, the striped material is from a sheet I found at a thrift store for $2. Can’t beat that price for a whole lot of material. So next time you are at a thrift store or garage sale, keep your eyes open for cheap, cute material!

April 13, 2009 · Filed under: Crafts, Kids, Sewing, Tutorials Tagged with

Make A Girls Nightgown From A Pillow Case

14 Comments

I made this cute nightgown from a pillowcase! I have seen this idea all over the net for a while now and found a tutorial that was pretty easy and had sleeves. The tutorial I used can be found here.

I used a pillow case we had received as a wedding gift almost 15 years ago. It was not our “style” and so it sat in a closet, long forgotten. During some spring cleaning I happened across them again and realized they would be perfect for this nightgown I had been wanting to make. (If you are reading this and realize that you are the giver of this wedding gift…um…we love them. Even if it took us 15 years to appreciate them! HaHa!)

I followed the above mentioned tutorial except made my sleeves bigger. I cut off the folded end of the pillowcase, 3 inches to make the wider sleeves).

Instead of using a ribbon to pretty up the sleeve, I used some green and white polka dot material I had. I cut a long strip that was about 24 inches long and 2 1/2 inches wide. Then I folded the strip with the WRONG sides together and ironed. Then like the tutorial, I sewed along the two open sides (not the fold) close to the edge. Pulling one of the strings, carefully, I gathered the material. Then I made sure to even out the material so that it fit into the 3 inch strip I cut off of the pillowcase and sewed them together. When your sleeves are sewn, finish the dress part of the gown and then fit dress on child and maeasure exactly where you would like the sleeves to sit over the shoulders and pin into place, before sewing.

I finished the nightgown by following the rest of the tutorial. Then, I added a little “Yo-Yo” to add an embelishment and some flare.

To make a yoyo, cut out a circle of fabric whatever size you want. My circle was 3 inches in diameter. I used a spool of ribbon for my pattern. I folded over the edge about 1/4 of an inch and hand sewed it down. The farther apart your stitches are the smaller your hole in the middle of the yoyo will be.

Then when you have finished sewing, do not tie off the end. Leave a length of string and pull on your thread so that it bunches up into a small tight circle.

Then use the long thread to stitch it onto the center of your nightgown (or wherever you would like it to go). I also added a white button on top of the yoyo to hide the small opening in the center. Now you have a fun, summery nightgown for your little girl or grandchild, or a fun gift for someone special!

I will be taking a little break to spend some time Spring Breaking with the family. I will be back next week with some fun new tutorials. I have been sewing up a storm!