DIY Growth Chart Tutorial

I have been wanting to build a Growth Chart for a couple of years now.  Growing up, we had a wall dedicated to tracking my siblings and my growth over the years and it has been so fun to look back and see how tall we were compared to each other and to my own children at the same ages.

DIY-growth-chart-1_thumb.png

When we moved into this home almost 11 years ago we dedicated a wall in my youngest daughters room for the same thing.  But, I always wanted to have a portable one so that I could switch things up cause well…I obviously like change…haha!  I finally got around to making one.

DIY-growth-chart-2_thumb.png

I have seen several versions floating around on the internet and fell in LOVE with Cozy Cottage Cute DIY Growth Chart.  Usually if I see something, I like to add my own changes to make it my own personal style…but hers was perfection…so I pretty much copied it with a few exceptions.  Be sure to head on over to her site to see just how she made hers…

DIY-growth-chart-3_thumb.jpg

Materials needed:

a pine board 1 x 8 x 7 feet (actual measurements are 3/4 x 7 x 7 feet)

stain

white paint

painters tape

coarse sand paper

hand sander (if possible)

number stickers or vinyl 1-6

DIY-growth-chart-5_thumb.jpg

Directions:

1.  Stain your board.  We used 2 stains…which is totally unnecessary.  We only did two because we wanted it to match the wood color in our home and the closest match we have found is to mix Minwax’s Jacobbean and Red Mahogony.  Allow board to dry completely after wiping away any excess stain.

DIY-growth-chart-8_thumb.jpg

2.  Then we taped off the board in 6 inch sections.  And painted every other section with white paint and started so that the bottom 6 inches is white.  We gave it two coats and let it dry completely.  Be sure to pull off the tape while the paint is still slightly wet so you get a nice clean line without the paint pulling up.

DIY-growth-chart-7_thumb.jpg

3.  Attach your number stickers in the stained section just below the white line above it, which should be every foot on your board so that the white line marks the 1 foot length, the 2 foot length and so on.  Paint your numbers using the vinyl as a stencil for the number.  Pull up the stencil before the paint is fully dry.  Let dry completely.  I made sure I let it dry at least 24 hours so that when I sanded it, the paint didn’t smear.

DIY-growth-chart-9_thumb.jpg

4.  Then take your hand sander and go to town sanding this baby.  I wanted it to have a real distressed look to it.

We used my new favorite hand sander, Rockwell’s 5 inch Random Orbital Sander.

RK4246K

It is the perfect size for a woman’s hand and is easy to hold and fully control because it only weighs 3 lbs.  I also love that it has a cyclonic filter that sucks all the dust into a little canister instead of allowing the dust to fly everywhere.  LOVE that feature.  It has allowed me to sand my projects inside during the winter months without getting dust everywhere!  It is also the quietest sander I have ever used!

DIY-growth-chart-10_thumb.jpg

5.  Pay special attention to some of the knots and fun unique characters of your piece of wood and sand those areas to add some interest to the final Growth Chart.  Wipe down the board and you are ready to go!

DIY-growth-chart-11_thumb.jpg

The hardest part will be trying to figure out WHERE to keep it.  Everyone seems to want it in their room.  We plan to transfer our past measurements to this new chart and marking them on the board with a fine black sharpie.  We just draw a line on one edge of the chart with the child’s initial and the year and month they are in.  For example if we were to measure me right now we would mark a line at 5 feet 8 inches and write  ___ A 40.6 yr.

Yes…I am 40!

And yes…my camera is still dead and I have yet to replace it.  All these photos were taken on my iphone and the quality is killing me people!  So bear with me!! Hoping to get my new camera by this weekend!!